View SE2435L_8535861.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

skyworks solutions, inc. ? phone [ 781] 376-3000 ? fax [781] 376-3100 ? sales@ skyworksinc.com ? www.skyworksinc.com 202412h ? skyworks proprietary information ? products and product in formation are subject to cha nge without notice ? jul y 7, 2015 1 data sheet SE2435L: 860 to 930 mhz high-power rf front-end module applications ? internet of things ? smart meters ? in-home appliances ? smart thermostats ? industrial applications features ? integrated pa with +30 dbm output power ? integrated lna with programmable bypass ? integrated antenna switching with transmit/receive diversity function ? low fem noise figure of 2 db, typical ? single-ended 50 ? transmit/receive rf interface ? fast turn-on/turn-off time: < 1 sec ? supply voltage: 2.0 to 4.8 v ? sleep mode current: < 1 a ? qfn (24-pin, 4 x 4 x 0.9 mm ) nipdau plated package (msl1, 260 ? c per jedec j-std-020) s kywork s green tm product s are compliant with all applicable legi s lation and are halogen-free. for additional information, refer to skyworks de?ition of green tm , document number s q04C0074. n/ c 18 15 17 1 6 14 13 1 4 2 3 5 6 24 21 23 22 20 1 9 7 1 0 8 9 11 12 n/ c tx_flt cs d tr pa_in c p s c tx n/ c n/ c ant1 tx_in y0083 v cc 1 v cc 0 n/ c v cc 2 pa_out n/ c a nt_ s el gnd lna_in n/ c rx_flt ant2 figure 2. SE2435L pinout C 24-pin qfn (top view) pa lna tr ant1 ant2 lna_in rx_flt pa_in tx_flt c p s cs d c tx logic c ontrol ant_ s el pa_out tx_in y14 6 4 figure 1. SE2435L block diagram description the SE2435L is a high-performance, highly integrated rf front-end module designed for high-power industrial, scientific, medical (ism) band applications operating in the 860 to 930 mhz frequency range. the SE2435L is designed for ease of use and maximum flexibility with fully matched 50 ? tx and rx inputs and antenna outputs, and digital controls compatible with 1.6 to 3.6 v cmos levels. the rf blocks operate over a wide supply voltage range from 2.0 to 4.8 v allowing the SE2435L to be used in battery powered applications over a wide spectrum of the battery discharge curve. the SE2435L is packaged in a 24-pin, 4 x 4 mm quad flat no- lead (qfn) package. a functional block diagram of the SE2435L is provided in figure 1. figure 2 shows the pinout for the SE2435L. table 1 lists the pin assignments and signal descriptions.
data sheet ? SE2435L: 860 to 930 mh z high-power rf front-end module skyworks solutions, inc. ? phone [ 781] 376-3000 ? fax [781] 376-3100 ? sales@ skyworksinc.com ? www.skyworksinc.com 2 july 7, 2015 ? skyworks proprietary info rmation ? products and pr oduct information are subject to change without notice ? 202412h table 1. SE2435L signal descriptions pin name description pin name description 1 csd shutdown control input 14 ant1 antenna port 1 2 pa_in pa input (from tx filter) 15 n/c not connected internally to the device 3 cps rx path select control input 16 tx_in tx signal to antennas (from omn) 4 ctx transmit enable control input 17 n/c not connected internally to the device 5 tx_flt transmit signal (to tx filter) 18 n/c not connected internally to the device 6 tr bi-directional rf signal to/from transceive r 19 n/c not connected internally to the device 7 ant_sel antenna select control input 20 pa_out pa output (to z optimum) (note 1) 8 g nd g round 21 vcc2 positive power supply 9 lna_in lna input (from rx filter) 22 n/c not connected internally to the device 10 n/c not connected internally to the device 23 vcc0 positive power supply 11 rx_flt rx signal from antennas (to rx filter) 24 vcc1 positive power supply 12 ant2 antenna port 2 paddle g nd exposed die paddle; electrical and thermal ground. connect to pcb ground 13 n/c not connected internally to the device note 1: z optimum = 5 for +30 dbm or 8 for +27 dbm p out . electrical and mechanical specifications table 2 provides the absolute maximum ratings, and table 3 shows the recommended operating conditions.electrical specifications are provided in tables 4 through 9. typical performance characteristics are shown in figures 3 through 8. table 2. SE2435L absolute maximum ratings (note 1) parameter symbol minimum maximum units supply voltage (no rf) v cc C0.3 5.5 v operating temperature t a C40 85 c storage temperature t st g C40 125 c tx input power at tr port p in _ tx _ max +10 dbm rx input power at ant1 or ant2 ports p in _ rx _ max +10 dbm electrostatic discharge: human body model (hbm), class 1c esd 1000 v note 1: exposure to maximum rating conditions for extended periods may reduce device reliability. there is no damage to device with on ly one parameter set at the limit and all other parameters set at or below their nominal value. exceeding any of the limits listed here may result in permanent damage to the d evice. caution : although this device is designed to be as robust as possible, electrostatic discharge (esd) can damage this device. this devi ce must be protected at all times from esd. static charges may eas ily produce potentials of several kilovolts on the human body or equipment, which can discharge without detection. industry-standard esd precautions should be used at all times.
data sheet ? SE2435L: 860 to 930 mh z high-power rf front-end module skyworks solutions, inc. ? phone [ 781] 376-3000 ? fax [781] 376-3100 ? sales@ skyworksinc.com ? www.skyworksinc.com 202412h ? skyworks proprietary information ? products and product in formation are subject to cha nge without notice ? jul y 7, 2015 3 table 3. SE2435L recommended operating conditions parameter symbol minimum typical maximum units supply voltage on vcc v cc 2.0 4.0 4.8 v ambient temperature t a C40 +25 +85 c table 4. SE2435L dc electrical specifications (note 1) (v cc = 4.0 v, f = 915 mhz, t a = +25 ? c, unless otherwise noted) parameter symbol test condition min typical max units total supply current, transmit mode i cc _ tx 30 i cc _ tx 27 i cc _ tx 24 p out = +30 dbm p out = +27 dbm p out = +24 dbm 550 380 275 ma ma ma total supply current, receive mode i cc _ rx 6 ma total supply current, receive bypass mode i cc _ rxb 280 a quiescent current i cq _ tx no rf 50 ma sleep supply current i cc _ off no rf 0.05 1.00 a note 1: performance is guaranteed only under the conditions listed in this table. table 5. SE2435L electrical specifications: c ontrol logic characteristics (note 1) (t a = +25 ? c, unless otherwise noted) parameter symbol test condition min typical max units control voltage: high low v ih v il 1.6 0 vcc (note 2) 0.3 v v input current: high low i ih i il 1 1 a a note 1: performance is guaranteed only under the conditions listed in this table. note 2: for pin 7, ant_sel, the maximum is 3.6 v. table 6. SE2435L electrical specifi cations: mode control logic (t a = +25) mode cps csd ctx ant_sel sleep (all off) 0 0 0 x receive or transmit bypass 0 1 0 x receive lna mode 1 1 0 x transmit x 1 1 x ant1 port enabled x x x 0 ant2 port enabled x x x 1 note 1: 1 = 1.6 to vcc, 0 = 0 to 0.3 v, x = dont care.
data sheet ? SE2435L: 860 to 930 mh z high-power rf front-end module skyworks solutions, inc. ? phone [ 781] 376-3000 ? fax [781] 376-3100 ? sales@ skyworksinc.com ? www.skyworksinc.com 4 july 7, 2015 ? skyworks proprietary info rmation ? products and pr oduct information are subject to change without notice ? 202412h table 7. SE2435L electrical speci fications: ac transmit mode (v cc = 4 v, t a = +25 ? c, all unused ports terminated at 50 ? , unless otherwise noted. input port tr, output ports ant1 and ant2 lumped elements filter connected between the tx_flt and pa_in pins) parameter symbol test condition min typical max units frequency range f 860 930 mhz output power at ant1 or ant2 ports in the 900 to 930 mhz frequency range (note 1) p out _915 v cc = 4.8 v v cc = 4.0 v v cc = 3.6 v v cc = 3.0 v +31.5 +30.5 +29.5 +28.0 dbm dbm dbm dbm output power at ant1 or ant2 ports in the 860 to 870 mhz frequency range (note 2) p out _860 v cc = 4.0 v v cc = 3.6 v v cc = 3.0 v v cc = 2.0 v +27 +24 +21 +18 dbm dbm dbm dbm pa power added efficiency pae_ pa p out = +28 dbm at pa_out port, 915 mhz 64 % small signal gain (note 1) s 21_915 900 to 930 mhz 26 db small signal gain (note 2) s 21_860 860 to 870 mhz 26 db small signal gain variation (notes 1 and 2) ? s 21 g ain variation across frequency range 2 dbp-p output return loss (notes 1 and 2) s22 ant1,2 into 50 ? , ant1 and ant2 ports C10 C6 db 2 nd harmonic (notes 1 and 3) 2fo p out = +30 dbm C22 dbc 3 rd to 10 th harmonic (notes 1 and 3) 3fo to 10fo p out = +30 dbm C72 dbc turn-on time (note 4) t on 1 s turn-off time t off 1 s stability stab cw, p in = 0 dbm 0.1 g hz to 20 g hz load vswr = 6:1 all non-harmonically related outputs less than C43 dbm ruggedness ru cw, p out = +30 dbm into 50 , load vswr = 10:1 no permanent damage note 1: 900 to 930 mhz with specified matching network on the evaluation board. note 2: 860 to 870 mhz with specified matchi ng network on the evaluation board. note 3: measured with continuous wave signal. note 4: from 50% of ctx edge to 90% of final rf output power.
data sheet ? SE2435L: 860 to 930 mh z high-power rf front-end module skyworks solutions, inc. ? phone [ 781] 376-3000 ? fax [781] 376-3100 ? sales@ skyworksinc.com ? www.skyworksinc.com 202412h ? skyworks proprietary information ? products and product in formation are subject to cha nge without notice ? jul y 7, 2015 5 table 8. SE2435L electrical speci fications: ac receive mode (v cc = 4 v, t a = +25 ? c, f = 900 to 930 mhz and 860 to 870 mhz, all unused ports terminated at 50 , unless otherwise noted. input port ant1 or ant2, output port tr. 0 connected between the rx_flt and lna_in pins in lieu of external filters) parameter symbol test condition min typical max units frequency range f in 860 930 mhz receive gain r x _ g ain 14 16 18 db receive noise figure nf 2 2.5 db input third order intercept iip3 C5 C2 dbm input 1-db compression point ip1db C15 C12 dbm antenna port return loss s11 ant1,2 into 50 ? , ant1 and ant2 ports C12 C8 db turn-on time (note 1) t on 1 s turn-off time (note 2) t off 1 s g ain in bypass mode g _bp C3 C2 db input 1-db compression point in bypass mode ip1db +10 dbm note 1: from 50% of ctx edge to 90% of final rf output power. note 2: from 50% of ctx edge to 10% of final rf output power. table 9. SE2435L dc electrical specifi cations: diversity antenna function (v cc = 4 v, t a = +25 ? c, f = 900 to 930 mhz and 860 to 870 mhz, all unused ports terminated at 50 ? , unless otherwise noted) parameter symbol min typical max units isolation between ant1 and ant2 ports isol antsw C20 db insertion loss from tx_in to ant1 t x _ ant 1 0.8 db insertion loss from tx_in to ant2 t x _ ant 2 0.8 db insertion loss from ant1 to rx_flt r x _ ant 1 0.6 db insertion loss from ant2 to rx_flt r x _ ant 2 0.6 db insertion loss from tr to tx_flt txrx_tx 0.5 db ant1 to ant2 switching time transmit mode t ant 1- ant 1 _ tx 800 ns ant1 to ant2 switching time receive mode t ant 1- ant 2 _ rx 400 ns
data sheet ? SE2435L: 860 to 930 mh z high-power rf front-end module skyworks solutions, inc. ? phone [ 781] 376-3000 ? fax [781] 376-3100 ? sales@ skyworksinc.com ? www.skyworksinc.com 6 july 7, 2015 ? skyworks proprietary info rmation ? products and pr oduct information are subject to change without notice ? 202412h typical performance characteristics (note 1) (v cc = 4 v, t a = +25 ? c, f = 900 to 930 mhz, all unused ports terminated at 50 ? , unless otherwise noted) C120 C110 C100 C 9 0 C80 C70 C 6 0 C50 C40 C30 C20 #2 #3 #4 #5 # 6 #7 #8 # 9 #10 level (dbc) # harmonic s t s 205 9 00 mhz 9 15 mhz 9 30 mhz figure 3. typical harmonics level at +30 dbm p out (including antenna filter) 20 22 24 2 6 28 30 32 34 +10 +12 +14 +1 6 +18 +20 +22 +24 +2 6 +28 +30 +32 t s 27 6 gain (db) output power (dbm) 9 00 mhz 9 15 mhz 9 30 mhz figure 5. typical gain vs p out (v cc = 4 v) y1475 +10 +12 +14 +1 6 +18 +20 +22 +24 +2 6 +28 +30 +32 output power (dbm) 20 22 24 2 6 28 30 32 34 gain (db) +34 2.0 v 3.3 v 3.6 v 4.0 v 4.8 v figure 7. typical gain vs p out (v cc = 2.0 to 4.8 v) 50 150 250 350 450 550 6 50 +5 +10 +15 +20 +25 +30 +35 C22 C20 C18 C1 6 C14 C12 C10 C8 C 6 C4 C2 0 +2 +4 + 6 i cc (ma) p out (dbm) input power (dbm) pout [dbm] i cc [ma] y1472 figure 4. typical p out and i cc transfer characteristics y1474 50 150 250 350 450 550 6 50 i cc (ma) output power (dbm) 9 00 mhz 9 15 mhz 9 30 mhz +10 +12 +14 +1 6 +18 +20 +22 +24 +2 6 +28 +30 +32 figure 6. typical i cc vs p out (v cc = 4 v) 30 35 40 45 50 55 +20 +21 +22 +23 +24 +25 +2 6 +27 +28 +2 9 +30 +31 +32 +33 +34 pae (%) t s 272 output power (dbm) 3.3 v 3. 6 v 4.0 v 4.8 v 2.0 v figure 8. typical pae vs p out & v cc , cw (vcc = 2.0 to 4.8 v) (including omn and antenna filter losses) note 1: typical performances graphs at 868 mh z are available upon request (+24, +27, and +30 dbm p out ).
data sheet ? SE2435L: 860 to 930 mh z high-power rf front-end module skyworks solutions, inc. ? phone [ 781] 376-3000 ? fax [781] 376-3100 ? sales@ skyworksinc.com ? www.skyworksinc.com 202412h ? skyworks proprietary information ? products and product in formation are subject to cha nge without notice ? jul y 7, 2015 7 evaluation board description the SE2435L-ek1 evaluation is to demonstrate the performance of the SE2435L front-end module. it is optimized for evaluation, experimentation and investigation, using cw (continuous wave) signals. figure 9 shows the evaluation board. the evaluation board schematic diagram is provided in figure 10. the bill of materials (bom) for the SE2435L evaluation board is listed in table 10. t s 037 figure 9. SE2435L evaluation board
data sheet ? SE2435L: 860 to 930 mh z high-power rf front-end module skyworks solutions, inc. ? phone [ 781] 376-3000 ? fax [781] 376-3100 ? sales@ skyworksinc.com ? www.skyworksinc.com 8 july 7, 2015 ? skyworks proprietary info rmation ? products and pr oduct information are subject to change without notice ? 202412h c 1 10 nf c 11 1 nf c 8 33 pf c 2 22 pf c 10 100 pf r1 3.3 pf l4 3.3 nh l3 4.7 nh l5 l2 l8 l 6 6 .8 nh 6 .8 nh 6 .8 nh l 9 l7 6 .8 nh 6 .8 nh 1.3 nh c 3 8.2pf c 17 1.8 pf c9 3.3 pf c 12 3.3 pf l1 3.0 nh c 13 3.3 pf c6 4.7 f cs d c p s c p s c tx tr c tx ant_ s el j3 j4 j1 j2 s ma s ma s ma cs d n/ c n/ c n/ c ant1 n/ c pa_in tx_flt tx_in ant_ s el gnd n/ c rx_flt ant2 lna_in pad v cc 1 n/ c n/ c v cc 2 pa_out v cc 0 1 2 3 4 5 6 18 17 1 6 15 14 13 7 8 9 10 11 12 25 24 23 22 21 20 1 9 u1 SE2435L v cc vdd c tx c p s cs d ant_ s el 1 3 5 7 9 11 13 15 17 1 9 2 4 6 8 10 12 14 1 6 18 20 t s 038 note: discard n/c pins that are connected to ground on the evaluation board. figure 10. evaluation board schematic for 915 mhz applic ation and fcc conducted harmonics rejection compliant
data sheet ? SE2435L: 860 to 930 mh z high-power rf front-end module skyworks solutions, inc. ? phone [ 781] 376-3000 ? fax [781] 376-3100 ? sales@ skyworksinc.com ? www.skyworksinc.com 202412h ? skyworks proprietary information ? products and product in formation are subject to cha nge without notice ? jul y 7, 2015 9 table 10. SE2435L evaluation board bill of materials (note 1) component part number description value package manufacturer l2 lq g 15hn1n3s02d high frequency mu ltilayer 1.3 nh 0402 murata c17 g rm1555c1h1r8cz01 multilayer ceramic 1.8 pf 0402 murata c11 g rm155r71h102ka01 multilayer ceramic 1 nf 0402 murata l1 lq g 15hn3n0s02d high frequency mu ltilayer 3.0 nh 0402 murata l4 lq g 15hn3n3s02d high frequency mu ltilayer 3.3 nh 0402 murata l3 lq g 15hn4n7s02d high frequency multilayer 4.7 ? f 0402 murata c6 g rm188r60j475ke19 multilayer ceramic 4.7 ? f 0603 murata c3 g rm1555c1h8r2dz01 multilayer ceramic 8.2 pf 0402 murata c1 g rm155r71e103ka01 multilayer ceramic 10 nf 0402 murata j4 tsw-110-07- g -d 100 mil header 10x2 100 mil samtec c2 g rm1555c1h220jz01 multilayer ceramic 22 pf 0402 murata c8 g rm1555c1h330jz01 multilayer ceramic 33 pf 0402 murata c10 g rm1555c1h101jz01 multilayer ceramic 100 pf 0402 murata u1 SE2435L 860 to 930 mhz high power rf fem SE2435L qfn400x400 skyworks j1, j2, j3 142-0701-851 sma end launch straight jack recept acle C tab contact sma end launch johnson components c9, c12, c13, r1 g rm1555c1h3r3cz01 multilayer ceramic 3.3 pf 0402 murata l5, l6 ,l7, l8, l9 lq g 18hn6n8s00d high frequency mu ltilayer 6.8 nh 0603 murata n ote 1: schematic and bom has been designed to optimize performance with cw signals, 100% duty cycle. evaluation board setup procedure this section provides the details required to setup the evaluation board and the test equipment for the SE2435L. table 11 describes the pins on the power and control i/o header j4. note that it is recommended to use proper engineering connection practices by making rf and digital connections prior to turning on the power supply. connect supply 1. connect (j1, j2, and j3) to 50 ? instruments. terminate all unused ports (if applicable) with 50 ? . 2. connect the supply ground to pin 1 of j4. 3. connect 3.6 v or 4.0 v to pin 2 of j4: the required rf path/antenna can be selected using the information in table 6. measure performance ? tx: the 860 to 930 mhz (depending on the region) amplifier performance can be monitored by applying an rf signal to connector j1 (tr), and monitoring the output power on connector j2 (ant2) or j3 (ant1). ? rx: the 860 to 930 mhz lna performance can be monitored by applying an rf signal to connector j2 (ant2) or j3 (ant1), and monitoring the output signal on connector j1 (tr). caution care should be taken not to overdrive the amplifier by applying too much rf on the input to the device. a starting input power of ?0 dbm is suitable for the device.
data sheet ? SE2435L: 860 to 930 mh z high-power rf front-end module skyworks solutions, inc. ? phone [ 781] 376-3000 ? fax [781] 376-3100 ? sales@ skyworksinc.com ? www.skyworksinc.com 10 july 7, 2015 ? skyworks proprietary info rmation ? products and pr oduct information are subject to change without notice ? 202412h table 11. power and control i/o header (j4) evaluation board label pin number description recommended setting g nd 1,3,5,7,9,11,13,15,17,19 g round g eneral purpose grounds vcc 2,4,6,10,14,18 supply voltage g eneral purpose vcc provided as the main power supply. ctx 8 control see table 6. cps 12 control csd 16 control antsel 20 control package dimensions the layout footprint for the SE2435L is provided in figure 11. typical part markings are shown in figure 12. package dimensions for the SE2435L are shown in figure 13, and tape and reel dimensions are provided in figure 14. package and handling information instructions on the shipping container label regarding exposure to moisture after the container seal is broken must be followed. otherwise, problems related to moisture absorption may occur when the part is subjected to high temperature during solder assembly. the SE2435L is rated to moisture sensitivity level 1 (msl1) at 260 ? c. it can be used for lead or lead-free soldering. for additional information, refer to the skyworks application note, solder reflow information , document number 200164. care must be taken when attaching this product, whether it is done manually or in a production solder reflow environment. production quantities of this product are shipped in a standard tape and reel format.
data sheet ? SE2435L: 860 to 930 mh z high-power rf front-end module skyworks solutions, inc. ? phone [ 781] 376-3000 ? fax [781] 376-3100 ? sales@sk yworksinc.com ? www.skyworksinc.com 11 november 11, 2014 ? skyworks proprietar y information ? products and product information are s ubject to change without no tice ? 202412 g board metal 4.40 0.500 typ 0.25 typ y1538 5x 1.02 5x 0.51 5x 0.0 5x 0.51 5x 1.02 s older ma s k pattern (note 6 ) 4.40 2.70 0. 6 0 typ 4.50 2.50 4.50 2.50 0.500 typ 0.35 typ 4 x 4 qfn package outline 25x ? 0.254 5x 1.02 5x 0.51 5x 0.0 5x 0.51 5x 1.02 0.500 typ 0.25 typ 4.40 0.70 typ 0. 6 0 typ 1.00 typ 1.00 typ 0.20 typ 4.40 0.20 typ s tencil pattern (note 5) 6 4% s older c overage on c enter pad 0 via pattern (note 4) notes: 1. all dimensions are in millimeters. 2. interpret dimensions and tolerances per asme y14.5m-1994. 3. unless speci?d, dimensions are symmetrical about center lines. 4. via hole recommendations: 0.025 mm cu via wall plating (minimum), solder mask on the far side should tent or plug via holes. 5. stencil recommendations: 0.125 mm stencil thickness, laser cut apertures, trapezoidal walls and rounded corners offer the best paste release. 6. solder mask recommendations: contact board fabricator for recommended solder mask offset and tolerance. 2.70 0 figure 11. SE2435L recommended footprint (top view)
data sheet ? SE2435L: 860 to 930 mh z high-power rf front-end module skyworks solutions, inc. ? phone [ 781] 376-3000 ? fax [781] 376-3100 ? sales@ skyworksinc.com ? www.skyworksinc.com 12 july 7, 2015 ? skyworks proprietary info rmation ? products and pr oduct information are subject to change without notice ? 202412h s ige 2435l xxxx part number pin 1 de s ignator lot c ode e4 figure 12. typical part markings (top view) top view s ide view 4.00 0.05 pin 1 indicator 4.00 0.05 b 0.05 c 0.203 ref s eating plane 0.000-0.005 2.70 0.05 2.70 0.05 24x 0.20 min 0.500 0.30 x 45 a 0.05 c 0.05 c 2x 2x 0.08 c 25x c 4 0.85 0.05 pin 1 indicator expo s ed pad s ee detail b s ee detail a r0.075 typ 0.05 c 0.10 c a b 0.40 0.05 0.25 0.05 5 2x r0.075 0.05 c 0.10 c a b 0.40 0.05 0.25 0.05 5 r0.075 0.0 9 3 0.05 0.307 0.05 bottom view detail a s cale 2x (1 6 place s ) detail b s cale 2x (8 place s ) y21 66 notes: 1. all measurements are in millimeters, unless otherwise speci?d. 2. dimensions and tolerances according to asme y14.5m-2009. 3. unless otherwise speci?d the following values apply: decimal tolerance: angular tolerance: x.x (1 place) ?0.1 mm ?.5 x.xx (2 places) ?0.05 mm x.xxx (3 places) ?0.025 mm 4. coplanarity applies to the exposed center ground pad as well as the terminals. 5. dimension applies to the metallized terminal. if the terminal has a radius, the dimension should not be measured in that radius area. 6. plating requirements per source control drawing (scd) 2504. 7. unless speci?d, dimensions are symmetrical about center lines. figure 13. SE2435L package dimensions
data sheet ? SE2435L: 860 to 930 mh z high-power rf front-end module skyworks solutions, inc. ? phone [ 781] 376-3000 ? fax [781] 376-3100 ? sales@ skyworksinc.com ? www.skyworksinc.com 202412h ? skyworks proprietary information ? products and product in formation are subject to cha nge without notice ? jul y 7, 2015 13 notes: 1. 10-sprocket hole pitch cumulative tolerance ?.2. 2. camber in compliance with eia-481. 4.35 0.1 12.0 0.3 pin 1 indicator 4.35 0.1 1.75 0.1 8.0 0.1 d 1.50 +0.10 4.0 note 1 0.254 0.013 1.22 0.1 2.0 0.05 5.5 0.05 y008 6 figure 14. SE2435L tape and reel dimensions
data sheet ? SE2435L: 860 to 930 mh z high-power rf front-end module skyworks solutions, inc. ? phone [ 781] 376-3000 ? fax [781] 376-3100 ? sales@ skyworksinc.com ? www.skyworksinc.com 14 july 7, 2015 ? skyworks proprietary info rmation ? products and pr oduct information are subject to change without notice ? 202412h ordering information model name manufacturing part number evaluation board part number SE2435L-s SE2435L-r SE2435L SE2435L -ek1 copyright ? 2013-2015 skyworks solutions, inc. all rights reserved. information in this document is provided in connection with skyw orks solutions, inc. (skyworks) products or services. these m aterials, including the information co ntained herein, are provided by skyworks as a service to its customers and may be used for info rmational purposes only by the cu stomer. skyworks assumes no res ponsibility for errors or omissions in these materials or the information contained herein. skyworks may change its documentat ion, products, services, specific ations or product descriptions at any time, without notice. sk yworks makes no commitment to update the materials or information and shall have no responsi bility whatsoever for conflicts, incompatibilities, or other diff iculties arising from any future changes. no license, whether express, implied, by es toppel or otherwise, is granted to any in tellectual property rights by this document . skyworks assumes no liability for any materials, products or information provided hereunder, including the sale, distribution, re production or use of skyworks products, information or mate rials, except as may be provided in skyworks terms and conditions of sale. the materials, products and information are pr ovided as is without warranty of any ki nd, whether express, implied, statutory, or otherwise, includin g fitness for a particular purpose or use, merchantability, performance, quality or non-infrin g ement of any intellectual property ri g ht; all such warranties are hereby expressly disclaimed. skyworks does not warrant the accuracy or completeness of the information, text, g raphics or other items contained within these ma terials. skyworks shall not be liable for any dama g es, includin g but not limited to any special, indirect, incidental, statutory, or consequential dama g es, includin g without limitation, lost revenues or lost profits that may result from the use of the materials or information, wheth er or not the recipient of mat erials has been advised of the possibility of such dama g e. skyworks products are no t intended for use in medical, lifesaving or life-su staining applications, or other equipment in which the failure of the skyworks products could lead to personal injury, death, physical or environmental damage. skyw orks customers using or selli ng skyworks products for use in such applications do so at their own risk and agree to fully indemnify skyworks for any damages resulting from such improper use or sale. customers are responsible for their products and applications us ing skyworks products , which may deviate from published specifi cations as a result of design de fects, errors, or operation of products outside of published pa rameters or design specifications. customers sh ould include design and operating safeguards to minimize these and other risks. skyworks assumes no liability for applications assistance, customer product de sign, or damage to any equipment resulting from the use of skyw orks products outsid e of stated published specifications or parameters. skyworks and the skyworks symbol are trademarks or registered trad emarks of skyworks solutions, inc., in the united states and other countries. third-party brands and names are for identification purposes only, and are the pr operty of their respective owners. additi onal information, including relevant terms and conditions, posted at www.skyw orksinc.com, are incorporated by reference.

▲Up To Search▲

Price & Availability of SE2435L

	To Download SE2435L Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .